| |
Cooling Systems
Call or contact us for help in finding the
right cooling system for you, or to place an order.
WhisperKOOL™ Wine Cellar Systems
Affordable and easy to install, through-wall wine cellar systems
are a simple solution to creating an actively conditioned wine
cellar. We recommend WhisperKOOL™ systems, because we
have found them to be the best through-wall systems for
reliability and performance.
EASE OF
INSTALLATION - WhisperKOOL™ has been designed
specifically to fit between standard wall studs mounted high in
the wine cellar; this eliminates the need to build a support
shelf.
CONDENSATE EVAPORATOR SYSTEM - These wine cellar systems
are designed to collect and dissipate excessive moisture which
accumulates during the normal operation. A sophisticated heating
element dissipates the collected moisture and evaporates it
through the exhaust port located at the rear of the unit.
VIBRATION FREE OPERATION - These wine cellar systems are
designed with state-of-the-art compressors and components. This
combination is engineered to provide vibration free operation.
SOLID AND DURABLE CABINET DESIGN - The polymer coating on
the galvanized steel housing gives the Whisperkool™ system a beautiful, textured finish which resists fingerprints,
rust, nicks and scratches.
|

 |
| |
Ductless Split Cooling System
Ductless split wine cellar refrigeration systems offer
superior performance to through-wall systems while allowing for
room design and location flexibility. Ductless split
systems can be installed in your wine cellar in a location that
optimizes design and system performance without expensive
ductwork.

Wine Cellar Cooling Unit --- Wine Guardian
The Wine Guardian® wine cellar cooling units are commercial
grade, self-contained packaged coolers for professional wine
cellars and storage facilities. These coolers are the most
installation-friendly and versatile wine cellar cooling units on
the market. Many of these features are unique to Wine Guardian
and not found in any other systems.

Humidification
Wine Guardian's humidifier can be ordered either as
free-standing or integrated units, to best suit application
needs/preferences. Both models--made in the USA--are evaporative
drip-pad type models that are easy to install and operate. They
add moisture to the cellar as required and sensed by the WG's
humidistat.
The free standing version can be used with any wine cellar air
conditioning system, while the integrated version must be
mounted to a Wine Guardian unit.
Principles of operation
Air from the cellar is drawn over an evaporative drip pad that
is saturated with water from a distribution tray. As the air
passes through the pad, it absorbs moisture through evaporation
of the water. This raises the humidity of the leaving air that
returns to the cellar. The humidistat, located in the cellar,
will automatically turn on the humidifier whenever the cellar
humidity is below the set point and turns it off when the cellar
humidity reaches set point. The recommended set point is 50% to
70% RH for wine cellars. The humidity level is high enough to
prevent corks from drying out and low enough to prevent mold
from forming.
Humidifier features
• Completely self-contained design with
cellar-mounted humidistat
• Drip pad-type humidification with removable, cleanable pad
• Lightweight, corrosion-resistant, all aluminum outer body
• Integral fan for air circulation
• Removable supply grille and drip pad access cover for easy
service
Maintenance of the humidifier
A regular maintenance program prolongs the life of the
humidifier and help maintain proper humidity levels in the
cellar. Frequency of cleaning and replacement of the drip pad
depends on the inlet water conditions and the cleanliness of the
cellar air. The drain system may also trap dust and dirt. When
water no longer stays on the pad or mineral build-up has started
to reduce airflow, the pad needs to be replaced. For these
reasons we suggest you check the drain on a monthly basis and
confirm there is a steady flow of water while unit is in
operation. Clean drain if needed.
Also monthly, check for unusual noise or vibration, which could
be a sign that the debris may be trapped and needs to be
removed. Refer to your humidifier's installation operation and
maintenance manual for step-by-step instructions on how to clean
the humidifier and replace the evaporative drip pad.
We carry a full line of cooling systems that may not be shown
here. Call or contact us for help in
finding the right cooling system for you, or to place an order.
Alarm Systems
CELLAR
CENTRAL: The Wine Security System
I offer a security system with every wine cellar design. |

FEATURES & BENEFITS
Maximum Flexibility
Minimal Noise
Superb Performance
Reliability
Thermostat Included
Digital Display
Completely self-contained, requiring no
external piping
• Can be installed through-wall, ducted remote, or any
combination
• Built-in powerful, motorize impeller fans for external
ducting
• Pre-wired, wall mount thermostat for flexibility of
location and proper control of temperature and humidity
• Built-in, cleanable filters on both evaporator and
condenser coils to keep free of dust and maintain optimum
operating conditions
• Corrosion-resistant cabinets of powder-coated aluminum for
lasting durability
• Optional humidifier for dry locations
• Optional electric heating coil for cold climates
• Low ambient option for mounting in cold areas such as a
garage or outside shed

Free-standing humidifier

Integrated humidifier |